Getinge MAQUET CARDIOHELP

| 10 | 1 General Information | CARDIOHELP System |
Service Manual | 3.3 | EN | 05
Copyright Maquet Cardiopulmonary GmbH
[Settings] Change general settings.
[Pump] Change the control mode LPM/RPM.
[Data recording] Change the interval for data recording, recording data offline and exporting recorded data.
[Alarm list] Displays alarm list.
[Close Menu] To close the menu and return to the last screen displayed.
[Global Override] “Global Override“ mode.
[Current alarm pause] Pause current alarm.
[Parameter list] Switch to parameter list.
[Blood parameters] Switch to [Blood parameters] screen.
[Interventions] Switch to [Interventions] screen.
[Timer] Switch to the [Timer] screen.
[Transport] Switch to [Transport] screen.
[Application] Switch application.
[v-a ECLS] Switch to the thApp v-a ECLS
[VAD] Switch to the thApp VAD