Getinge MAQUET CARDIOHELP User Manual

| 82 | 5 Service Interfaces | CARDIOHELP System |
Service Manual | 3.3 | EN | 05
Copyright Maquet Cardiopulmonary GmbH
n Special
n Function test
n Base Unit IPC (only for professionals)
5.2.2 "Welcome" Tab
"Welcome" tab
This tab contains general information about the service tool software.
n Software version of the service tool software
n Responsible manufacturer of the software
5.2.3 "Software Update" Tab
"Software update" tab
Any software updates required can be carried out in this tab.
On opening the software package, a check of the installed software takes place at the same time.
Discrepancies are displayed in the “Software update” tab, under “Device”.
For further information, refer to ⇨ "Carry Out Software Update", page 85.
5.2.4 "Maintenance" Tab
"Maintenance" tab

Getinge MAQUET CARDIOHELP Specifications

General

Brand	Getinge
Model	MAQUET CARDIOHELP
Category	Medical Equipment
Language	English