Getinge MAQUET CARDIOHELP

| 38 | 3 Inspection | CARDIOHELP System |
Service Manual | 3.3 | EN | 05
Copyright Maquet Cardiopulmonary GmbH
3 Check the connections on the front for damage and cleanliness.
Front connections
u Front connections are in good condition and clean - passed/ failed.
4 Check the sensor connections for damage and cleanliness
Sensor connections
u Sensor connections are in good condition and clean - passed/ failed.
5 Check the fuse used in the fuse module of the AC connector plug [5].
u Correct fuse installed in the AC connector plug and functional - passed/failed.