1.
2.
3.
Turning forwarding of all calls on/off with a function key
(P710)
Turning call forwarding on
Note: Call forwarding is set separately for each configured identity separately. When the setting is done on the
phone, it applies to the identity selected as outgoing identity.
Press . The display will show the screen.Target when Forwarding
Note: If is not available when the display is in idle mode, you can make it available on the Function Keys
page of the phone's web interface. For further information see chapter Configuring the function keys, "Example 3,
changing setting of context-sensitive
key"
If no forwarding number has been set or if it needs to be changed, make the necessary entries.
Press
Turning call forwarding off
Press the function key underneath
To Next Page
Loading...
