Display options for SmartLabel keys (P710)
A number of settings control the appearance of the SmartLabels on the display; they can be set on the phone and on
the phone's web interface. There are separate settings for the idle screen, call screens, and other screens. Settings
options:
Default display mode and . The display will revert to the default mode after the Alternative display mode
number of seconds set in have elapsed. The factory defaults are label Back to default display mode Short
for the , and label for the . You can also turn either one Default display mode Full Alternative display mode
or both of them off.
Short label Full label
Alternative display trigger. This setting defines how the appearance of the Smart Labels is switched from
the default to the alternative appearance. The default setting is , i.e., pressing SmartLabel key Long press P4
P4 for 2 seconds.
Return/Reset to default mode timer after (sec.). This setting defines after how many seconds the
appearance of the SmartLabels will automatically return to the default. Valid values are 0 to 360 seconds, the
default is 3 seconds. Selecting 0 turns automatic reversion off.
Manually returning the display mode to the default: Press . The display mode will also return to the
default setting when another key is pressed, e.g., a number key to open the dial screen, the directory key
to access the phonebook, etc.
To Next Page
Loading...
