1.
2.
1.
2.
3.
1.
a.
b.
Using different dialing methods (P710)
Auto dial
When the setting is enabled, the phone will dial the number on the display when the specified number of seconds has
elapsed since the last digit was typed.
Note: The default setting is off.
Redialing
Press to show the last numbers dialed, with the very last number at the top.
Press to dial that number or use / to select a different number and then press
Calling number from call history (missed, received, dialed calls)
Press (dialed calls), (received calls), or (missed calls) to open the respective call list.
Use / to select a call.
Press to dial the number.
Calling number from external directory
Open the dial screen to get access to the external directory, if available:
Lift the handset off the cradle or press the speakerphone key to open the dialing screen (Fig. 1).
Press the function key underneath to show the list of available directories and call lists (Fig. 2).
Fig. 1 Fig. 2
c. Select the external directory.
2. Use / to select a name or enter the first letter(s) of the name on the alphanumeric keypad.
3. Press to dial the number.
To Next Page
Loading...
