1.
2.
3.
4.
Connecting the phone (P710)
(1)
If PoE not available
(2)
Not included in delivery
(3)
Optional
The phone can be operated with Power over Ethernet
(PoE) provided via the network cable or, if PoE is not
available in your network, with the separately available
5V DC power adapter.
Plug the long uncurled end of the 4P4C handset
cord into the connector labelled , and
connect the short one to the handset.
Plug the Ethernet (network) cable into the RJ45
connector labelled and plug the other end NET
into the network side to establish a data link.
If PoE is not available, insert the plug of the
power supply into the connector labelled 5V DC
and hook up the plug to the wall outlet.
The other RJ45 connector, labelled , is for PC
daisy-chaining further Ethernet devices without
the need for a second Ethernet connection line.
To Next Page
Loading...
