Attaching footstand and handset (P710)
The footstand can be attached at two different angles: 46° and 28°.
Note: Before attaching the footstand to the phone, plug the long end of the handset cord into the connector labelled " "
on the back of the phone and place the cord in the cable guide.
1. Place the top of the grooves on the footstand below the slideguides on the back of the phone.
2. Push the footstand upwards onto the slideguides until they lock in place.
3. Plug the short end of the handset cord into the connector on the handset.
4. Place the phone on an even, horizontal surface.
To Next Page
Loading...
