Gigaset IP PRO P710 - Appendix 2 - Status Messages (P710)

146
Appendix 2 - Status Messages (P710)
Whenever there is a current message concerning the status of the phone, the function key will be available. Press the
function key or, if it not available, > > to open the " " screen. Information Status Info Status info
Additionally, some status messages will also be displayed in the status bar; if there is more than one current message,
the one with the highest priority will be shown. The messages in descending order of priority:
Status message Definition
SW
1
A firmware update is available
Reboot required
1
Reboot required, for example to have settings changes take effect
SIP disabled ,²
1
The phone cannot make calls due to license problems
Error
1
An error occurred
Low memory
1
Disk space full
Remote directory is
too big
1
The remote directory is too big to be imported
Not Registered:
<account> ,²
1
The specified identity/account is not registered
Waiting for <name
/number> to be
available ²
Waiting for call completion to busy or currently unavailable number
<account> is now
available ²
The dialed number is not busy anymore or is now available
Forward when Busy:
<name/number>
Call forwarding is on. When your phone is busy, incoming calls will be forwarded to the
phone number indicated
Forward after Timeout:
<name/number>
Call forwarding is on. When an incoming call is not picked up within the set number of
seconds, the call will be forwarded to the phone number indicated
Forward all: <name
/number> ²
Forwarding of all incoming calls is on. All incoming calls will be forwarded to the phone
number indicated.
Contacting NTP server Network Time Protocol (NTP) is a protocol for synchronizing clocks over data network. If the
connection is interrupted, the phone will not be able to display the correct time.
NTP server
unreachable
1
HTTP Password not
set
1
No HTTP password has been set
Admin Password not
set
1
No Admin password has been set
Keyboard locked ² Only numbers designated as emergency numbers can be dialled
DND active ² Do not Disturb mode is activated
You have messages There are spoken messages on the mailbox
You have new
messages
New (messages on the mailbox)
Old messages Old (messages on the mailbox)
Missed: <number> The number of calls you missed since the last time you checked the list of missed calls or
turned off the missed call indication