Assigning ringtones (P710)
The phone has 10 built-in ringtones that can be assigned to identities, group types, and the contact type "VIP". It is also
possible to download a custom melody. When an incoming call to an identity is ringing, the phone will play the ringtone
assigned to that identity, unless it is a call from a VIP or a
group with a distinctive ringer of their own.
Note: Ringers assigned to the contact type VIP and to any of the group types override the ringers assigned to
identities. For example, if you have assigned Ringer 1 to one of the identities and Ringer 2 to the group
"Colleagues", the phone will play Ringer 2 when a contact from the "Colleagues" group calls that identity.
If your ringtones don’t seem to work as expected, contact your administrator. There may be an overriding setting
on the PBX.
Assigning ringtones to contact type VIP and group types: See Ringtones (P710)
Selecting identity ringtones:
On the phone: Press > > > . If there is more than one configured identity on Preferences Audio Ringer
the phone, they are shown on the display.
Select an identity with / , if necessary, and press to hear the current ringtone for that
identity. The current ringtone is indicated by the checked radio button .
Selecting a different ringtone.
Press / to navigate up and down the list of ringtones.
Press the function key underneath the symbol to play the ringtone highlighted by the white
bar; press the function key underneath the symbol to end playback.
Press to save the ringtone highlighted by the white bar as the new ringtone for the selected
identity and return to the identity screen.
To Next Page
Loading...
