Hold (P710)
One call on hold
Press to put the ongoing call on hold. Held calls are indicated threefold:
By the text on the display.
By the slowly blinking line key.
By the slowly blinking call indication LED.
By the double beep.
You can now:
Transfer the held call blindly or with prior announcement
Receive and make calls and put other calls on hold.
Pick up the held call by pressing its line key or by pressing again. If the other party hangs up while on hold,
the call is terminated on your phone as well and the LED indicators are turned off.
Holding multiple calls
When you are in a call with one party and have one or more calls on hold and when there is more than one call on
hold, the symbol is available in the function key line. You can switch back and forth between the active call and
any call on hold. Up to 6 simultaneous calls are possible, if supported by the PBX.
In Fig. 1–2 the phone is in one active call with a second call on hold. Press the function key underneath
or to show the call not currently on screen.
Fig. 1 Fig. 2
In Fig. 3 and 4 there are two calls on hold. Press the function key underneath to show the call not currently on-
screen.
To Next Page
Loading...
