1.
Speed dialing
Setting speed dial numbers: Mapping a speed dial number onto one of the freely programmable function keys:
Speed dial number on speed dial list
Enter the speed dial number (0-30) or character (#, *) assigned to the phone number you wish to dial.
Press to dial.
Speed dial number mapped onto freely programmable function key: Select the page, if necessary, and press
the key.
Calling emergency numbers
Numbers specified as emergency numbers can be dialed even when the keypad is locked. Several numbers (911,
112, 110, 999) have been preconfigured.
On an unlocked keyboard: Enter the number and press to dial.
On a locked keyboard: Enter the number. The phone dials the number as soon as you have entered all the
digits of one of the programmed emergency numbers.
Call completion
This function depends on whether it is available in your network or not. On Gigaset phones call completion means
that when a called number is busy or not available, you can have your phone call you back as soon as the dialed
number is not busy anymore or available again. The factory default
setting is "off".
When call completion is enabled, the symbol will appear in the function key line whenever you dial a
number (Fig. 1). Press the key underneath to activate call completion for this call.
Fig.1 Fig. 2 Fig. 3
2. Press / if you wish to dial another number while waiting for call completion (Fig. 2). You can now hang up
the handset to return to the idle screen where the symbol is show in the info bar (Fig. 3); use handset,
headset, or speakerphone to dial another number; receive calls etc. Call completion will not interfere with the normal
operation of your phone.
To Next Page
Loading...
