Transferring active calls and ringing incoming calls to the number set in the
"Number" text field. Pressing the key once will transfer the active or ringing call.
If the text field is empty, pressing the key will put the "Enter number" screen on
the display. Enter the number and press / to complete the transfer.
For further information, see the article "Transferring calls" in the chapter "Using
the phone".
Voice Recorder The phone does not record the voice streams at all; they must be recorded on the
PBX where a recording account must be set up. Pressing the key when the phone
is idle will establish a connection between the phone and the recording account,
making it possible to record spoken memos, meetings, or conferences. Pressing
the key during a call will establish a three-party conference with the two phones
and the recording account as participants. Please be advised that you must
respect the legal restrictions of your country for recording calls with or without the
participants' knowledge and permission.
Xml Definition Copy the XML sub tag of the action(s) you want the key to perform into the text
field.
Key Events
ABS Address book search (OCS accounts)
Accepted Calls (Accepted List) List of calls accepted on the phone
Call Lists Call history list (missed, received, dialed calls)
Change active ID List of registered SIP identities
Conference Starting a conference
Contacts Contact List, where the Presence State of selected users can be seen (online,
busy, offline)
Directory Internal phone directory
DND Turning "Do not disturb" function (DND) on an off. When mapped to a function key
with an LED, the LED will light up when DND is turned on.
Favorites Favorites list
Forward all All incoming calls will be forwarded to another extension or an external phone
number. After turning call forwarding on with this key, the display will prompt you
to enter - or confirm/change a previously entered - forwarding number.
Help Phone's IP address and the URI to Gigaset Wiki. IP address, MAC address, and
firmware version can be found in Settings > 6 Information > 2 System Information.
Hold Placing the active call on hold
LDAP Directory Allows the user to look up a remote directory while dialing. Once set, this pressed
key will open up the Direcory Search window. If LDAP is setup, corresponding
matching entries as returned by the sever will be shown. If LDAP is not used and
and presence_lookup_number setting is turned on, the contact matches will be
shown. The default edit mode is alphanumeric in this state.
Logoff Identities Caution: This option will delete all account settings!!
Usage: Mainly useful for call centers with frequently changing users.
Menu Calling up the settings menu of the phone
Missed Calls Missed call history list
Monitor Calls When the phone has been programmed to monitor extensions and do/allow call
pickup, a key can be mapped to show the list of monitored extensions and do call
pickup from the monitor.
Mute Mutes/unmutes the microphone (handset, speakerphone, headset) during active
call
Next Outgoing ID Selecting the next identity as the outgoing identity
Presence State
To Next Page
Loading...
