Operating and use. Logi Control 115
Code no. 550038
Rev. no. 16/1018
8.5.3. Modifying the contents of programs. Menu Pro
The ironer allows for ten ironing programs with pre-recorded content.
The content of all programs is initially the same.
Initial program content
However, the content of each program can be modified to adapt it to the different ironing applications.
Program modification sequence
Access the ADVANCED MODE of use (Section 8.5.1). The display shows Pro.
Press the key to access the program modification menu.
The display shows Pr-1. Ready to modify Program 1. The keys allow the user to select an other
program. Press the key to access the modification of the displayed program.
Roll speed control
This allows the user to select the speed control mode.
This keeps the programmed speed unchanged
The roll speed is automatically adjusted to ensure optimum
ironing
The keys allow the desired option to be selected.
The key validates the displayed selection and allows the user to access to the following programmable
function.
Roll rotation time in seconds
This allows the user to select the roll rotation speed.
Programmable speed range in HS models
Programmable speed range in MS models
The keys allow the desired speed to be selected.
The key validates the displayed selection and allows the user to access to the following programmable
function.