Operating and use. Inteli Control 80
Code no. 550038
Rev. no. 16/1018
7.1. Main menu. Intervention modes
The PB/PBP51, X20 ironer control is divided into THREE MAJOR OPERATION AREAS or user
INTERVENTION MODES. Each of the three modes is accessed through the MAIN MENU made up of three
icons identifying each of the modes.
PROGRAM EXECUTION MODE
Covers the functions or interventions aimed at:
Selecting and executing the different ironing programs
Accessing information about the different functions that the ironer is executing
Specific modifications of the program being executed
All the information that appears on the screen during the execution of a program is in
graphic mode.
Information regarding this intervention mode: section 7.5 on this manual.
PROGRAMMING MODE
Covers the functions or interventions aimed at:
Knowing the content of the PRE-SET program in the ironer machine’s memory
Creating a new ironing program or modifying an existing program
Copying an existing program and modify it
Blocking the use of programs
Eliminating programs from the ironer’s memory
All the information that appears on the screen in the program management menu is in
graphic mode.
Information regarding this intervention mode: section 7.6 on this manual.
SYSTEM TOOLS MODE
This area offers specific menus for CONFIGURING THE SYSTEM.
Among other features:
Configuring operation parameters
Setting the clock of the system
Controlling security codes
It also provides a lot of information about the characteristics and life of the ironer.
The information in this area is in text mode.
Information regarding this intervention mode: section 7.7 on this manual.
To Next Page
Loading...
Need help?
General
