Operating and use. Logi Control 119
Code no. 550038
Rev. no. 16/1018
Unit of linear speed
This allows the user to select the unit in which the linear speed of the roll is displayed.
Linear speed in metres per minute
Linear speed in feet per minute
The key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Buzzer
This allows the user to activate or deactivate the buzzer.
The key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Network identifier
This parameter assigns a network identifier to the ironer. This identifier enables the communication of the ironer
with the environment through a protocol based on RS-485.
Selected option by default: Id-0.
For further information, see the Communication Protocol Instruction Manual.
The key allows the user to modify the option displayed.
The key validates the displayed selection and allows the user to access to the Mod menu.
To Next Page
Loading...
Need help?
General
