138
The name of the RAID, only supports letters, numbers and underscores,
case-insensitive
Stripe size, the size of the stripe data blocks written on each disk
Read cache strategy, divided into Read Ahead (open read cache) and No
Read Ahead (close read cache)
Write caching strategy, divided into Write Through (write-through mode),
Always Write Back (write-back mode 1) and Write Back (write-back mode
2)
I/O strategy, divided into Cached (cache mode) and Direct (direct read and
write mode)
Read and write strategy, divided into Read/Write (read/write), Read Only
(read-only) and Blocked (forbidden operation)
Disk cache strategy, divided into Enable (open), Disable (close) and
Unchanged (automatic)
Default initialization method
Save the configuration created by the wizard
Table 1- 40
Do not use special characters as RAID names.
Compared with No Read Ahead, Write Through, and Direct, Read Ahead, Write Back, and Cached have
improved performance, but data consistency cannot be guaranteed.
If the supercapacitor is abnormal, when the write cache policy is set to "Write Back", the firmware will
implement "Write Through" for writing data; if the write cache policy is set to "Always Write Back", the
firmware write data will implement "Write Back".
8. Enter the interface shown in Figure 6-38, select Confirm to enable it, select Yes, and press Enter.
Figure 6-38 Confirm the configuration