77
5.2.19 Miscellaneous Configuration
Figure 5- 19
PCH state after G3
PCH state setting after G3, the menu options are:
S0: Power on directly
S5: You need to press the Power button to turn on the power
leave power state unchanged: keep the power state unchanged
Default: S0
Max Page Table Size Select
To select the maximum page table size setting, the menu options are:
2M
1G
Default: 1G
Active Video
Select the active display device type, the menu options are:
Auto
Onboard Device
PCIE Device
Default: Auto
To Next Page
Loading...
Need help?
General
