65
Stop Bits
Serial port data packet end flag, the menu options are:
1
2
Default: 1
Flow Control
Serial port redirection control flow selection switch, the menu options are:
None: close the serial port redirection control flow
Hardware RTS/CTS: Request to Send/Clear to Send
Default: None
VT-UTF8 Combo key support
ANSI/VT100 terminal VT-UTF8 key combination support switch, the menu options are:
Disabled: Disable ANSI/VT100 terminal VT-UTF8 key combination support
Enabled ANSI/VT100 terminal VT-UTF8 key combination support
Default: Enabled
Recorder Mode
Record mode switch, enable this function, only text information will be sent, the menu options are:
Enabled
Disabled
Default: Disabled
5.2.7 SIO Configuration
Figure 5- 6
To Next Page
Loading...
