Graco T-MAX 506 - Hose Lubrication Mixing Instructions

Preparation
18 3A6748B
Hose Lubrication Mixing Instructions
Hose lubrication (17Z224) is used to lube the
pump and hose passages to reduce the risk
of packout when priming aggregate material.
NOTE: If using other hose lubricants, follow
manufacturer’s mixing instructions.
1. Empty one bag of hose lubricant into
five-gallon bucket and half fill with water.
2. Stir for one minute.
3. Fill remainder of bucket with water. Stir
for one minute.
4. Let mix stand for at least five minutes or
until a slick-like texture develops.