Preparation
3A6748B 19
Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
1. Turn ON/OFF Switch to OFF and turn
Pressure Control Knob fully
counterclockwise to OFF.
2. Point applicator into hopper. Turn
applicator ON.
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid, such as skin injection, splashing fluid
and moving parts, follow the Pressure
Relief Procedure when you stop spraying
and before cleaning, checking, or
servicing the equipment.
To Next Page
Loading...
Need help?
General
