Repair
66 3A6748B
Recycling and Disposal at End of Life
At the end of the product’s useful life,
dismantle and recycle it in a responsible
manner.
Preparation:
• Perform the Pressure Relief
Procedure.
• Drain and dispose of fluids according to
applicable regulations. Refer to the
material manufacturer’s Safety Data
Sheet.
Dismantle and recycle:
• Remove motors, circuit boards, LCDs
(liquid crystal displays), and other
electronic components. Recycle
according to applicable regulations.
• Do not dispose of electronic components
with household or commercial waste.
• Deliver remaining product to a recycling
facility.