Grandstream Networks GXP2200 User Manual

Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 117 of 159
3. Open a Web browser on your computer;
4. Enter the phone’s IP address in the address bar of the browser;
5. Enter the administrator’s login and password to access the Web Configuration Menu.
Figure 136: GXP2200 Main Screen - IP Address
Note:
 The computer has to be connected to the same sub-network as the phone. This can be easily
done by connecting the computer to the same hub or switch as the phone connected to. In
absence of a hub/switch (or free ports on the hub/switch), please connect the computer directly to
the PC port on the back of the phone;
 If the phone is properly connected to a working Internet connection, the phone will display its IP
address. This address has the format: xxx.xxx.xxx.xxx, where xxx stands for a number from 0-255.
Users will need this number to access the Web GUI. For example, if the phone shows
192.168.40.154, please enter “http://192.168.40.154” in the address bar of the browser;
 The default login name for the administrator is "admin". The default administrator password is set
to "admin". The default login name for end-users is "user" while the default user password is set to
"123";
 When changing any settings, always SUBMIT them by pressing the Save button on the bottom of
the page, and then clicking the Apply button on the top of the page to apply the configuration
changes.
For those options with next to it in the Web page, users must reboot the phone for the
changes to take effect.

Grandstream Networks GXP2200 Specifications

General

Brand	Grandstream Networks
Model	GXP2200
Category	Telephone
Language	English