For example:
Connect a USB flash drive to save captured pictures;
Connect a USB light to the GXP2200.
Connect a USB Wi-Fi dongle to the GXP2200.
To set up the GXP2200, follow the steps below:
1. Attach the phone stand to the back of the phone where there is a slot for the phone stand. Upper part
and bottom part are available for two angels;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 3, this step could be skipped;
5. The LCD will display the booting up screen. Before continuing, please wait for the main screen display
to show up.
GXP2200 EXTENSION MODULE (GXP2200EXT)
The GXP2200 extension module (GXP2200EXT) is an ideal solution for the busy enterprise environment
looking to add the ability to receive and dispatch calls efficiently. Each extension module has 20
programmable buttons, Left and Right buttons, supporting 40 Multiple Purpose Keys to be configured.
GXP2200 supports up to 4 extension modules, adding 160 fully programmable phone extensions to the
phone.
To Next Page
Loading...
Need help?
General
