Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 36 of 159
MAKING PHONE CALLS
REGISTERING SIP ACCOUNTS
The GXP2200 supports up to 6 independent SIP accounts. Each account may have separate SIP servers,
usernames and NAT configurations.
For example, the user has configured 4 SIP accounts on GXP2200: Account 1, Account 2, Account 3 and
Account 4. The registration status for each account is displayed on the main screen. The icon next to the
account name will indicate the registration status ( Green: registered; Grey: unregistered;
Yellow: registered as SCA account). The following figure shows Account 1 and Account 2 are registered,
while Account 3 and Account 4 are configured but not registered.
Figure 21: GXP2200 Account Registration Status
To register the account, users could directly configure from MENU button->Settings->Advanced
Settings->Account. Or users could log in the GXP2200 web GUI->Account page to fill in the necessary
registration information, i.e., Account active, Account name, SIP Server, SIP User ID, SIP Auth ID, SIP
Auth Password and etc. Once the correct information is entered and saved, the account registration status
will show on the main screen.
Note:
For web GUI login and configuration information, please refer to section [GXP2200 WEB GUI SETTINGS].
To Next Page
Loading...
Need help?
General
