CE6000-UM-251-9370 7-5
7 ELECTRICAL ADJUSTMENTS
7.5 Selecting Display Language & Length Unit
The Language selection menu and the Length Unit selection menu are displayed at the rst power on.
Select the Language and the Length Unit when the Language selection is displayed.
And when you are going to enter the adjustment mode select the language to English and then select the
Length unit to METRIC.
How to select the Language and Length Unit at the rst power on
(1) Select “English” by using the arrow keys at the following menu.
(2) Press the ENTER key after the display language was selected.
(3) Select “METRIC” by using the arrow keys at the following menu.
(4) Press the ENTER key after the displaying unit was selected.
(5) The following menu is displayed.
When the media is loading to the plotter:
When the media is not loading to the plotter:
(6) Turn off the power when above menu is displayed.
To Next Page
Loading...
