GRAPHTEC CE6000 SERIES - Y-Motor

CE6000-UM-251-9370 6-21
6 DISASSEMBLY AND REASSEMBLY
6.2.12 Y- motor
How to detach the Y-motor
(1) Detach the right side cover (See section 6.1.1.).
(2) Disconnect the Y-motor extension cable and the Y-motor encoder cable from the Y motor.
(3) Remove the three M3L6 binding head screws holding the Y-motor.
M3L6 binding head screw
Y motor
(4) Detach the Y-motor.
(5) Remove the two M3L4WP set screws holding the Y-motor pulley.
(6) Detach the Y-motor pulley.
M3L4WP set screw
Y motor
Y motor pulley