GRAPHTEC CE6000 SERIES - 3.3 Setting the Origin Point

CE6000-UM-251-9370 6-40
6 DISASSEMBLY AND REASSEMBLY
6.2.23 How to Conrm the Y rail mounting position
Conrm the Y rail mounting position if you are installing the Y rail to the main unit.
Y-rail mounting position
Mount the Y-rail as shown in the picture below when the Y-rail is installing.
The gap should not
be at these areas
when the Y rail is
installed.
The gap should not be at
these areas when the Y rail
is installed.
Y rail
Y rail
Left side Y rail position
Right side Y rail position
The left side of Y rail is xing by these three screws and the Y tension bracket.
The right side of Y rail is xing by these three screws and the Y motor bracket.
Left side plate
Right side plate
Y tension bracket