CE6000-UM-251-9370 8-5
8 SERVICE MODES
8.4 Test Pattern
Print a self-test pattern to check the operation of the plotter.
Operation
(1) Set a paper larger than A3 size.
(2) Set the pen tool to the tool carriage and select the condition where the pen tool is set.
(3) Press the PAUSE/MENU key at the following menu.
(4) The following menu is displayed, and then press the left arrow key (TEST).
(5) The following menu is displayed, and then press the F2 key (SELF TEST).
(6) The following menu is displayed.
(7) Conîš¿rm that the pen is set, and then press the F1 key (DONE) to print the test pattern.
(8) Turn the power off to stop the printing.
To Next Page
Loading...
