GRAPHTEC CE6000 SERIES - 4.1 Settings for Cutting

CE6000-UM-251-9370 7-6
7 ELECTRICAL ADJUSTMENTS
7.6 The Sufx setting
There are the following models for the CE6000.
The size of model is selected by the dip-switch setting.
The sufx setting must be set after the size of model is selected.
Model Suffix Model Remarks
CE6000-40
CE6000-40-STD Standard model of the CE6000-40
CE6000-40-STU USA model of the CE6000-40
CE6000-40 Plus
CE6000-40 Plus-STD Standard model of the CE6000-40 Plus
CE6000-40 Plus-STU USA model of the CE6000-40 Plus
CE6000-60
CE6000-60-STD Standard model of the CE6000-60
CE6000-60-STU USA model of the CE6000-60
CE6000-60 Plus
CE6000-60 Plus-STD Standard model of the CE6000-60 Plus
CE6000-60 Plus-STU USA model of the CE6000-60 Plus
CE6000-120
CE6000-120-STD Standard model of the CE6000-120
CE6000-120-STU USA model of the CE6000-120
CE6000-120-AMO Additional push roller model of the CE6000-120
CE6000-120 Plus
CE6000-120 Plus-STD Standard model of the CE6000-120 Plus
CE6000-120 Plus-STU USA model of the CE6000-120 Plus
CE6000-120AP - There is no sufx model with the CE6000-120AP.
How to recognize the STD model and the STU model.
The STD model has 2 positions tool holder.
The STU model has 1 position tool holder.
Tool holder
Bracket to hold tool
Tool holder
Bracket to hold tool
STD Model
STU Model
The STD model has 2
positions tool holder.
The STU model has 1
position tool holder.
How to recognize the CE6000-120 model and the CE6000-120AMO model
The CE6000-120-STD and STU model has 3 push-rollers.
The CE6000-120 Plus-STD has 4 push-rollers.
The CE6000-120 Plus-STU has 3 push-rollers.
The CE6000-120-AMO model has 4 push-rollers.