CE6000-UM-251-9370 6-15
6 DISASSEMBLY AND REASSEMBLY
6.2.8 Y-relay Board
How to detach the Y-relay board
(1) Detach the center cover (See section 6.1.3.).
(2) Detach the pen block cover (See section 6.2.6.).
(3) Disconnect all the cables from the Y-relay board.
Registration sensor cable
MC coil & encoder cable
Push roller sensor cable
Y relay board
M3L6 binding head screw
Y exible cable
(4) Remove the two M3L6 binding head screws attaching the Y-relay board.
How to reinstall the Y-relay board
(1) Reattach the Y-relay board in the reverse order in which it was detached.
To Next Page
Loading...
