GRAPHTEC CE6000 SERIES - Assembling the Stand (CE6000-40;60;120;120 AMO)

CE6000-UM-251-9370 2-7
2 PARTS NAMES and FUNCTIONS
2.2 Assembling the Stand (CE6000-40/60/120/120AMO)
The stand is made up of the following parts�
CE6000-60
Stand side bar x 2 Stand foot x 2 Center bar x 1 Allen wrench (for M5
screws) x 1
Socket head cap screw
(M5) x 12
Stock shaft x 2Media stocker x 2
Coin screw x 4Stopper x 2
CE6000-120
Stand side bar x 2 Stand foot x 2 Center bar x 1
*Contained in the packing
box of main unit.
*Contained in the packing
box of main unit.
*Contained in the packing
box of main unit.
Allen wrench (for M5
screws) x 1
Socket head cap screw
(M5) x 30
Stock shaft x 2Media stocker x 2 Media guide bar x 1Stopper x 2