GRAPHTEC CE6000 SERIES - Page 21

CE6000-UM-251-9370 2-8
2 PARTS NAMES and FUNCTIONS
Stand Assembly Instructions : CE6000-60
(1) Assemble the left and right stand sides. Fasten a stand foot to each of the stand side bars with two
socket head cap screws using the Allen wrench.
Stand side bar
Stand side bar
Socket head
cap screw
Stand foot
Cutout
(2) Attach the center bar to each of the left and right stand sides temporarily with two socket head cap
screws, using the Allen wrench. Mount the center bar so that each one of stand feet of short side to
be front side.
Socket head
cap screw
Socket head
cap screw
Center bar
Stand sides
Cutout
Long
Short
(3) Attach a media stocker to each of the left and right stand side bars with two socket head cap screws,
using the Allen wrench. Mount the media stockers so that each one of media stockers of long side to
be rear side.
Leveler frame
Stand sides
Socket head cap screw
Media stocker
Media stocker
Long