GRAPHTEC CE6000 SERIES - Y-Flexible Cable

CE6000-UM-251-9370 6-29
6 DISASSEMBLY AND REASSEMBLY
6.2.16 Y-exible Cable
How to detach the Y-Flexible cable
(1) Detach the right side cover (See section 6.1.1.).
(2) Detach the center cover (See section 6.1.3.).
(3) Remove the exible cable clamper holding the Y-exible cable and the core on the Y-relay board.
Y exible cable
Y relay board
Y exible cable clamper
Y exible cable
Y relay board
Y exible cable clamper
Y exible cable
Y relay board
Core
(4) Detach the core attached with double-sided adhesive tape to the Y-relay board.
(5) Disconnect the Y-exible cable from connector on the Y-relay board.
(6) Disconnect the Y-exible cable from connector on the main board.
Y exible cable
Main board
(7) Remove the Y-exible cable attached with double-sided adhesive tape to the Y-rail.