GRAPHTEC CE6000 SERIES - Page 149

CE6000-UM-251-9370 9-6
9 TROUBLESHOOTING
E03012 Invalid byte was received within
device control command.
Check the program.
E03013
A parameter outside of the
permissible range was specified in
the I/O related command.
Check the program.
E03014
Too many parameters in the I/O
related command.
Check the program.
E03015
Framing error, parity error, or
overrun error has occurred.
Set the RS-232C transmission
condition.
E03016
Interface buffer memory has
overflowed.
Set the RS-232C transmission
condition.