CE6000-UM-251-9370 3-5
3 OPERATIONS
[Left arrow ] (TEST) ........................Does the operation necessary for maintenance, such as self
diagnostic test or printout of the condition settings list.
[PAUSE/MENU] ..............................It will close the MENU screen and return to default screen.
[FAST] ............................................Displays the position key screen. When media is set, the tool point
can be moved.
Contents of Operation from [COND/TEST] Key
Simple mode
CONDITION screen (1-5): (Simple mode)
The [COND/TEST] key brings up the SETTING screens, where you can change the media type and tool
conditions.
The preset cutting condition is used when the media type is selected.
[COND/TEST]: This will clear the CONDITION screen and return to default screen.
Normal mode
CONDITION screen (1-3) : (Normal mode)
Tool conditions are set in the setting screens displayed by the [COND/TEST] key.
Up to 8 CONDITION settings can be saved with different settings in numbers 1 through 8.
[COND/TEST]: This will clear the CONDITION screen and return to default screen.
To Next Page
Loading...
