CE6000-UM-251-9370 6-12
6 DISASSEMBLY AND REASSEMBLY
(8) Detach the registration mark sensor board and the cable from the pen block. (The CE6000-
120AP does not have registration mark sensor board, therefore you don’t need to detach it from
the pen block of CE6000-120AP.)
Remove the M2.5L6 binding head screw holding the cable guide, and then detach the cable
guide.
Remove the M2.5L6 binding head screw holding the registration sensor board, and then detach
the registration sensor board with the registration sensor cable.
Registration mark sensor board
Registration mark sensor cable
M2.5L6 binding head screw
Cable guide
To Next Page
Loading...
