261
Detail program description - Basic settings
A simultaneous tap on the cd or ef selection keys
of the right touch pad (CLEAR) will reset the fi eld
shown in inverse video back to "2".
Region
SEL
GENERAL BASIC SETTINGS
Battery warning
3.60V
Stick warning
unlim
Touch sense
2
Region
EURO
The region is needed for compliance with various
regulations (FCC, ETSI, IC etc.). In France, for
example, the operation of a remote control is only
permitted within a limited frequency band. Therefore,
region MUST be changed to "France" for the
transmitter whenever it is operated in France. In
no case may the Universal/EURO mode be used in
France!
A simultaneous tap on the cd or ef selection keys
of the right touch pad (CLEAR) will reset the fi eld
shown in inverse video back to "Euro".
Own phase name 1 … 10
GENERAL BASIC SETTINGS
Stick warning
unlim
Touch sense
2
Region
EURO
Own phase name
1
Up to ten phase names can be freely specifi ed
for one's own use. Each of these can be up to 7
characters long. The characters of the name are
assembled by selecting them from a list. In addition to
the standard names, these additional names will then
also be available in all model memory locations.
If possible, new phase name entries should begin
with the "Own phase name 1" line.
Change to the character table with a brief tap on the
center
SET key of the right touch pad:
!"#$%&’()
Own phase name
@ACDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_
?+,–./0123456789:;¾
¢ÇüéâäàåçêëèïîìÄÅÉæÆôöòûùÖÜ
`abcdefghijklmnopqrstuvwxyz{|}~
A
Now the desired characters can be selected with the
selection keys of the left touch pad. With a brief tap
on the f selection key of the right touch pad or its
center
SET key, move to the next position in which a
character can be selected. A simultaneous tap on the
cd or ef keys of the right touch pad (CLEAR) will
place a space character at the current position.
Positioning to any character position within the entry
fi eld can be done with the ef keys of the right touch
pad.
A return to the previous menu page is accomplished
with a brief tap on the center
ESC key of the left
touch pad.