GETTING STARTED
GRIT Lock® and the Importance of Trigger
Configuration
The effectiveness of a majority of your GRIT system, including GRIT Lock, is dependent
upon properly configuring each tool's Trigger. A Trigger's "job" within the system is, in
essence, to measure and control current flow to its tool. All tools vary in the amount of
current they pull, the amount they pull when 'on' versus 'running' (i.e., CNCs), the time it
takes to reach their full draw (i.e., slow-start router tables), and the consistency with
which they pull it while running (i.e., lasers). With your shop's complexity in mind, GRIT
has a fully configurable application to completely capture each tool's power profile.
The details for properly configuring Triggers are covered under the Trigger Configuration
section.
10
To Next Page
Loading...