GRIT Lock - Switch Device Configuration

Switch Device Configuration
2
1
3
4
5
TRIGGERS
2. Rename the
device with the
name of the tool it
is associated with.
1. If you press Locate,
the Switch will beep
and flash when on the
charging dock, but
will take up to 30
seconds for the
device to wake up and
beep if it is operating
on battery only.
3. Battery Level is
displayed or the
charging status, if
on its dock.
4. Configure the
collector that will
turn on when this
Switch is on.
5. Configure the
gate or gates that
will be opened
when this Switch is
on.
64