GETTING STARTED
14
Device Power
Attention: Supplying appropriate and sufficient power for your GRIT
devices is crucial for optimal performance. Please, carefully read
through all power information and recommendations.
GRIT RFiD devices and Switch charging docks are powered with 6v
power*.
Power Requirements
GRIT Dust Bin Sensor's
Strobe Light is powered
with
12v power*.
*Note: We recommend that all
low-voltage power be run with
18/2 Solid Copper Thermostat
Wire.
GRIT Gate Control
devices are powered
with 9v power*.
To Next Page
Loading...