Industrial 220v Single Phase Trigger
40
8'' x 10'' x 4'' metal enclosure
Red/Green LED status indicator lights
16 Knockouts accommodating 3/4'' to 1 1/4'' wire/conduit
The Industrial Trigger* device includes:
1.
2.
3.
Installation
*Note: We recommend all electrical installation be performed by a licensed electrician.
Wire whip, mounting hardware, chase nipple, and FMC connector are not included.
See page 45 for installation instructions for the Industrial 220v 1PH and Industrial 208v
3PH Triggers.
To Next Page
Loading...