Removable low-voltage terminal (supplies 6v power)
Red/Green LED status indicator lights
1 ft. 10AWG 30a wire whips*
Plug your tool into the GRIT Trigger device.
Plug GRIT Trigger device into the wall.
The 220v Heavy Duty Trigger device includes:
1.
2.
3.
*Note: The 220v Heavy Duty Trigger does not come with a plug or socket end attached to
the wire whip since tools with this power profile vary widely. The supplied wire whip is
rated up to 30a. Customer is responsible for purchasing and wiring appropriate
plug/socket or larger gauge wire for their purposes.
Installation
Follow the instructions for wiring your chosen plug/socket. Once wiring is
complete:
1.
2.
To Next Page
Loading...