Plug your air filter into the GRIT Air Quality device.
Plug GRIT Air Quality device into the outlet.
*Plug jack of iR emitter into the port of Air Quality device
*Remove white sticker from the back of the iR emitter and place on top of the eye on
the air filtration system. Dusty environments might need more tape.
Air Quality
Installation
1.
2.
3.
4.
*Steps 3 and 4 are only used for air filtration systems with an iR remote. Basic on/off
systems or systems with an RF remote will not use the included iR emitter.
AIR QUALITY
The GRIT Air Quality device automatically controls air filtration units. It continuously
monitors air quality levels and activates the air filter system based on the configured
settings.
Built-in particulate sensor measuring
particles 2.5mg/m3 and 10mg/m3
Red/Green LED status indicator light
Standard 120v plug/socket (220v available
upon request)
iR emitter for air filtration systems with an
iR remote
RF transmitter for RF (inside device)
The Air Quality device includes:
1.
2.
3.
4.
5.
To Next Page
Loading...