GST GST5000 - 5.6 Resetting and Silencing of the System

GST5000 Intelligent Fire Alarm Control Panel
Installation and Operation Manual (Generic Part)
The Intelligent Solution
Page 40
Fig. 5-10
Description of action information:
 ! ACTION! total 100// Total number of action information
 001 16:34 zone 002－03 OPTICAL// Time, zone, device address and type of the
action.
 1 FLOOR COOKROOM// Zone definition (first 8 digits) and device, definition (last
32 digits).
 002 16:34 zone 002-101 OPTICAL// Time, zone, device address and type of the
action.
 1 FLOOR DINING ROOM// Zone definition (first 8 digits) and device definition (last
32 digits).
 003 16:34 zone 002-111 OPTICAL// Time, zone, device address and type of the
action.
 2 FLOOR LIVINGROOM// Zone definition (first 8 digits) and device definition (last
32 digits).
5.6 Resetting and Silencing of the System
First silencing the sound, then pressing RESET can turn off all the control modules,
local outputs and all the detectors without changing the state of disabled devices. The
LCD displays information of RESET IN SYSTEM, and all LEDs except for POWER
HEALTHY,AECURITY MODE and EXTINGUISHING SYSTEM PERMIT will be turned
off. The reset information will be written into running log. If there are still some fire
alarm, fault and action information not acknowledged after pressing the RESET key, the
FACP will remain sound indications. If all information has been acknowledged before
pressing RESET key, the system returns to normal display state.
If the FACP alarms, pressing MUTE, you can silence the speaker. Pressing MUTE
!ACTION! total 100
001 16:34 zone 002-03 OPTICAL
1 FLOOR COOKROOM
002 16:34 zone 002-101 OPTICAL
1 FLOOR DINING ROOM
003 16:34 zone 002-111 OPTICAL
2 FLOOR LIVINGROOM
Press Enter to Select an Item