GST5000 Intelligent Fire Alarm Control Panel
Installation and Operation Manual (Generic Part)
The Intelligent Solution
Page 46
Fig. 6-5
Choosing one from the options can enable or disable gas release function. If it is in
Enable mode, the EXTINGUISHING SYSTEM PERMIT indicator will be lit, the gas
release device can be started manually or automatically.
6.3.5 Modification of System Time
In monitoring state, pressing CLOCK (needing password if the keypad is locked), the
screen will display as in Fig. 6-6. Input the time in the highlight area and then press TAB
to move the highlight to next position. Press ENTER to confirm.
Fig. 6-6
Ver V4.05
To Next Page
Loading...
