GST5000 Intelligent Fire Alarm Control Panel
Installation and Operation Manual (Generic Part)
The Intelligent Solution
Page 45
Pressing
△
＝
and
＝
▽
followed by ENTER can choose different printing modes:
1. Disable printing
2. Print history records while viewing them
3. Only print fire records
6.3.3 Security Mode
Pressing SECURITY MODE (needing password if the keypad is locked), the system will
get into security mode setting, as shown in Fig. 6-4.
Fig. 6-4
The system can be set as security enable and disable mode under this screen. In
enable mode, the security alarm function is enabled to monitor the protected area by
security detectors, and SECURITY MODE LED illuminates.
6.3.4 Extinguishing Mode
Pressing EXTINGUISHING MODE, the system will enter gas extinguishing mode, as
shown in Fig. 6-5.
Ver V4.05
To Next Page
Loading...
