GST GST5000 - Fire Display Mode; Zone Browse; C&E Equation Browse

GST5000 Intelligent Fire Alarm Control Panel
Installation and Operation Manual (Generic Part)
The Intelligent Solution
Page 50
.
Fig. 6-12
Inputting 1, the system enters monitoring state.
Inputting 2, the system enters commissioning state.
6.4.4 Fire Display Mode
Select 4 "Fire display mode" under system setup menu (Fig. 6-7), the screen shows as
in Fig. 6-13.
Fig. 6-13
Inputting 1, fire information will be displayed by device.
Inputting 2, fire information will be displayed by zone.
6.4.5 Zone Browse
Refer to section 4.6.3.
6.4.6 C&E Equation Browse
Refer to section 4.7.
Ver V4.05
f
Display Mode
1.By Point
2.By Zone
Ver V4.05f
Working state setup
1. Monitoring State
2. Commissioning State