GST5000 Intelligent Fire Alarm Control Panel
Installation and Operation Manual (Generic Part)
The Intelligent Solution
Page 48
Fig. 6-8
Select the password to be modified, the screen will prompt to enter the old password.
Input the password and press ENTER. If the password is correct, the screen will prompt
to input the new password (Fig. 6-9). If the password is wrong, the system will exit
current operation.
Fig. 6-9
Enter new password and press ENTER.
To prevent mistake, the FACP requires entering the new password again (Fig. 6-10).
If you typed the same password twice, the screen shows a brief password display with a
long ‘beep’ sound and the system exits current operation, showing the new password
has been entered successfully. If there are any mistakes, the system will exit current
operation without any other prompt and the password will not be changed.
Ver V4.05
To Next Page
Loading...
