GUDEL FlexxPump 402 - Malfunctions; Repairs

8.2 Repairs
Always replace the complete FlexxPump, splitter, Y-segments, or hoses with
new ones in case of defects. Send the defective FlexxPump back to Güdel for
repairs.
8.3 Malfunctions / Troubleshooting
8.3.1 Display element and malfunctions
OFF
E1
E2
E3
E4
E5
A
B
C
D
E
F
G
H
Fig.8-1 Display element and malfunctions
A Digit display E Fault message for overcurrent
B LED red F Fault message for operating voltage too
low
C LED green G Fault message; internal electrical error
D Fault message for "Empty" H Fault message; internal mechanical error
Repairs
OPERATING MANUAL Automatic lubrication system
FlexxPump 402 / 402B
90071992656444683_v9.0_EN-US
106